I'm not crazy, I took my pills today =\

Sincerely Yours
Debraj

I am planning to take my CCNA exam on next week
any one have model simulations and questions
pl mail to me

thanks and regards
krishna kumar

Question:--What is the most common mail to device?
A. Hub
B. Router
C. Repeater
D. Switch

Question:-- What are 4 ways network management can be simplified by using the virtual LANs (VLANs)? (select four)

A. VLANs allow you to implement multiple layers switching easily.
B. VLAN can group several broadcasts domains into multiple logical subnets.
C. It is no longer necessary to install cables to move a user from a new network to another.
D. Network adds, moves and changes are achieved by configuring a port into a VLAN.
E. A group of users needing high security can be put into a VLAN so that no users outside the VLANs can communicate with them.
F. As a logical grouping of users, VLANs can be considered independent from their physical or geographic locations.

As I feel there is no difference between exam507 and 607.
As I had completed my entire academy program in 507 and took the exam In 607, though I had the option to choose from either one.

As it was the transition period between 507 and 607, I didn’t had any opportunity to get any help,from any one,as no one know much about it,except that Simulation questions been added and you need 849 (Minimum equired) to Pass.

The changes as follows:
1. Allocated time been reduced to 75min: from 90 min:
2. Question been brought down to 50 from 65-74.
3. Passing marks been gradually increased to 849 (at present).
4. One or two simulation question been added.

If you go through all the chapters in the book properly you can pass your exam with no fear. You should have the basic skill to configure router and must know how to use the utility like ping and tellnet etc.Hope this information helps you in advance to prepare for your exam well.

Love
Tara

Question:-- which of the following protocols used for logical network addressing ?
A. Bootp
B. RARP
C. IP
D. ICMP
E. TCP
F. ARP

Question:-- find usable network & usable hosts for network address 201.105.13.0/26

A:64networks 4hosts
B:4networks 64hosts
C:3networks 63hosts
D:62networks 2hosts
For correct answer you must click on the writing pad icon and write 2 networks & 62 usable hosts and submit.

Thx for the QOTD...

I just tried to login to our shared file account, couldn't get through. Did anyone has the same problem?

Please advise.

Cheers,
p

Simplicity is the key to life!

Thanks for your support i really wanted to be a CCNA
My E mail is and I would like to receive all the help I can

Thank you again and good luck to everyone

Question:--The network 172.12.0.0 needs to be divided into subnets where each subnet has the capacity of 459 IP address. What would be the correct subnet mask to accomplish thos division keeping the number of subnets at the maximum. Type the correct value in each box below.

172.12.0.0 hosts=459, 2^9=512 for usable subnets you must (-) 2,which is 512-2=510 and > 459

172.12.4.0/23 or subnet mask 255.255.254.0

Question:-- which conditions are used in a full-duplex ethernet card?
a.host to host
b.host to switch
c.switch to switch
d.switch to host
e.switch to hub
f.host to hub

Not the MSN, but the yahoo one. Couldn't log into it the whole day. I wonder whether you change thed user id and pw.

Cheers,
p

Simplicity is the key to life!

I have got this 3 questions and I´m not sure about the anwsers. Can anybody help me?

1.- The new host has been added to the workgroup switch although the layer 3 configurations is correct, the host is unable to access the server resources in its network segment. What is the problem?

a) The router lacks a routing table entry for the new host
b) The host switch port is assignedto the incorrect lan
c) The host MAC address is incorrectly configured
d) The vtp instance for the new host has not been initialized

2.- Which of these is fast digital signal and packed switched?

a) isdn
b) frame relay
c) atm
d) fddi

3.- Who are of the following, are true for the frame relay multipoint subinterface?

a) All routes required to be fully meshed
b) All routes must be in the same subnet to forward routing
c) IP address is required for the physical interface of the central route
d) Multipoint is the default configuration the frame relay subinterface

Many thanks

Best regards

Nuria

Would be possible You could share your CISCO CCNA 640-607 materials with me?

Thank you in advance

kros

email:

I wanted to thank you for the materials at the CCNA607, I am hoping they will help me get over the hurdle facing me in the next week or so. If you have any other material you are willing to share I would certainly appreciate your help. If not thank you so much for what I have gotten to this point and I hope to be able to post here sometime next week saying I have passed the exam.

Best of luck to all,

boomer

A+, Net+, CNA, CTT, MCSE2k

sorry but what do you mean updating my profile ..i need to get access to those files and to update my self to know more about the exam ...i may go for my exam few days only ..so plz help

quote:

---

Dear Haitham
Welcome to the forum,please update your profile (More About Me) so that every help will reach to you soon.
Thanks
Love
Tara

---

Question:-- what is the port number for UDP
A. 6
B. 17
C. 21
D. 25

Question:-- You telnet to a host on a remote network,which the MAC address will be present in the arp table when you issue show arp command?
a.MAC address of the destination host ethernet port
b.MAC address of the local router ethernet port
c.MAC address of the destination router special port
d.MAC address of the local router serial port

quote:

---

Dear Nuria!
Your answers are:
1.c) The host MAC address is incorrectly configured.
2.b) frame relay (Because ISDN is circuit-switched,ATM is cell switched[53bytes]and FDDI is Fiber Distributed Data Interface a LAN standard)
3.b) All routes must be in the same subnet to forward routing
Love
Tara

---

Dear Tara,

Could you explain your answer for Nuria's 1 question? Why c) ?????
We do not configure nor set any MAC address connecting any computer to a network? So why c) answer?????

I have one more question. What does question - "What is the most common mail to device?" - mean???
Unfortunately my English is not as good and I don't understand this question.
Could you express this question in another way for me?

regards kros

I will be taking up my CCNA exam at the end of this month (June 2002) and then planning to proceed to CCNP. Can you help me in preparing for it. I am already reading the Sybex CCNA book for 640-507.
If you have some other material to share that comes in the 640-607 exam, please send it to me at Also i saw messages on the list regarding a yahoo brief login, is it still valid ? If so please send at the given address.
Thanks for the help in advance.
Regards,
--
fnaik

1.- The new host has been added to the workgroup switch although the layer 3 configurations is correct, the host is unable to access the server resources in its network segment. What is the problem?

a) The router lacks a routing table entry for the new host
b) The host switch port is assignedto the incorrect lan
c) The host MAC address is incorrectly configured
d) The vtp instance for the new host has not been initialized

is "C" is because switches use MAC addresses to forward packets to their destination. If the MAC is incorrectly configured then the switch may not recognize the origination MAC address of outgoing packets or be able to forward incoming packets to the device with that MAC address.

I hope if I am incorrect that someone will point out the error in my thinking here. :D

Best Regards

Nuria