I am reading one article related to cRTP. Following is one of my
question:
cRTP can compress the 40 bytes of header down to 2-4 bytes most of the
time, howerver, an entire uncompressed header must be sent to verify
that both sides have the correct state. In such cases, the IP/RTP/UDP
header cannot be compressed, so an uncompressed header must be sent.
The configuration is
int s 0
ip add 192.168.121.18 255.255.255.248
no ip mroute-cache
ip rtp header-compressioin
enc ppp
Do I need to do some further configuration for the uncompressed header?
If yes, how to configure it? If no, when is the uncompressed header
sent?
The material on this web site is not sponsored by, endorsed by or affiliated with Cisco Systems, Inc. CISCO® is a registered trademark of Cisco Systems, Inc.; CCNA™, CCDA™, CCNP™, CCDP™, CCIE™, CISCO CERTIFIED NETWORK ASSOCIATE™, CISCO CERTIFIED DESIGN ASSOCIATE™, CISCO CERTIFIED NETWORK PROFESSIONAL™, CISCO CERTIFIED DESIGN PROFESSIONAL™, CISCO CERTIFIED INTERNETWORK EXPERT™ are distinctive trademarks used by Cisco to describe its certifications and examinations in the United States and certain other countries. All other trademarks are trademarks of their respective owners.
.gif)
Posted - Feb 07 2001 : 5:42:03 PM 
